Tag Archives: ADAT

So You Wanna Record A Big Band — Redux

Back in October 2008 I did a post that estimated the cost of getting all the gear to have a recording rig for your big band. Now, lets take a look at if things have changed.

The original post I went with an Alesis HD24 which was $1600 then. Its the same price now. For preamps, I went with the PreSonus’s DigiMax D8 which were going for $450. Now they go for about $400. We need three of these to give us 24 tracks. For mics, I had two options. Option one was 13 Shure 57s with stands and cables. Then they were $124 each. Now they are $109. Lets keep it simple and stick with that option.

Case for the PreSonus preamps and the Alesis. Its still about the same, $200. And we will keep the same snakes, which are still the same price. We need three of them. $200 each.

Running total now is $5017. Before it was $5412. The only real price difference was the DigiMax D8s and the Shure Mics. We still need to add in drum set mics which haven’t changed in price ($400), and two Rode NT4s, one for the drum overhead and one for acoustic piano. They haven’t changed in price. $530 each. And two SKB mic cases, which haven’t changed in price either. $150 each. And you need a vocalist mic, a Shure 58, which is $99, was $109.

Final total…..$6876. A year and a half ago, it was $7277. The single biggest cost are the microphones. I went the Shure 57 route due to cost and their reliability, but there are alternatives out there that are cheaper. And there are alternatives that are more expensive. If money was NO OPTION, I would probably replace the 13 mics used for the horns with Sennheiser 421s. However, at $299 not including stand and cable, replacing the Shure 57s with these would about $3887 and that is NOT including cables and stands. However, the microphones are really THE thing to spend money on.

So, it is slightly cheaper to get the gear. This is for all new stuff too. If you are internet savvy, you could probably score most all of the gear off Ebay or Craigslist or you could get the scratch and dent deals or open boxed ones. This could lower the costs by hundreds of dollars.